Supported manufacturers:

Solar-Log™ devices work with inverters made by:

  1. SMA
  2. KACO
  3. POWER-ONE
  4. FRONIUS
  5. MASTERVOLT
  6. CONERGY
  7. SOLARMAX
  8. SIEMENS
  9. REFU
  10. AROS

… and many more:

Please select a model:

Overview of all manufacturers

An overview of the equipment components and scope of services for the Solar-Log500.



Inverter communication / inverter = inverters  
Max. no. inverters 10
Communication interface 1 x RS485/RS422
Inverter mixed operation several inverters per manufacturer
Measured max. plant size 50 kWp
Max. cable length Max. 1000m1)
Bluetooth (BT) +
WiFi (wireless LAN) +
Bluetooth/WiFi +
Powermanagement (PM+) +
GPRS -
Powermanagement (PM+) / GPRS -
Inverter centrale SCB -
Plant monitoring  
String monitoring (depends on inv. model) +
Inverter failure +
Performance monitoring for each inverter +
Status/fault monitoring +
Connection to sensor system (solarisation/temp./wind) +
Connection to Sensor Basic +
Connection to digital meter reader +
Email and SMS alarm +
Local alarm (pot. free contact) -
Yield forecasting +
Degradation calculation +
Visualisation  
Integrated webserver +
Graphic visualisation - local PC +
Graphic visualisation - USB stick -
Graphic visualisation - internet +
LED status display +
Display on device 2-line dot matrix display
Operation on device Keypad
Large display RS485/S0 pulse +
Interfaces  
S₀ in/out + / +
Ethernet network +
USB stick -
Analogue modem / GPRS(GSM) -
Potential-free contact (relay) -
Alarm contact (anti-theft) -
General data  
Mains voltage / device voltage 220 V / 12 V
Power consumption 3W
Ambient temperature -10°C to +50°C
Housing/dimensions (B x T x H) in cm Plastic / 22.5 x 4 x 28.5
Assembly Wall assembly
Protection class IP 20 (for inside use only)
Connection to Solar-LogTM WEB +
Multilingual (DE, EN, ES, FR, IT, NL) +
Memory, micro SD, 2 GB, unending data display +
Warranty 5 years


1) Depends on inverter used and cable length. (Specifications may differ depending on device model)