The PowerLine Package is a problem-free alternative for transmitting data between the Solar-Log™ and the PC or the router without having to run extra cable when WiFi reception is poor or an Ethernet connection is problematic. Thanks to the integrated socket, a power connection is not wasted – the Solar-Log™, power strips or other devices can be connected directly to the adapter. An integrated mains filter optimizes the transmission capacity even more. In public areas, a Kensington lock provides for efficient anti-theft protection.
|Transmission speed||up to 1200 Mbit/s|
|Integrated electrical socket||Type F (CEE 7/4) • F (CEE 7/4) • (DE, NL,|
ES, PT, AT, SE, FI, NO, GR, HU)
|Encryption||128 Bit AES|
|Device connection||1 x Ethernet RJ45|
|Power consumption||Maximum W/A: 4.2, typical W/A: 3.0, Stand-By W/A: 0.7|
|Output power for |
|Power supply||internal 196-250 V AC 50 HZ|
|Temperature (storage, operating)||-25° C to 70° C, 0° C to 40° C|
|Ambient conditions||10 - 90% humidity (non-condensing)|
|Range||Powerline 400 m|
|Registrations||CE compliant: EU + (NO), CE Class B (EU, CH, NO)|
|Dimensions (w x h x d) in mm||130 x 66 x 42 (without connector)|
188.5 x 231 x 78.5 (single adapter)
188.5 x 231 x 78.5 (starter Kit)
|Gigabit/Number of Ports/Auto-MDI-X||1x Gigabit-LAN-Port with Auto-MDI-X Function for the connection of any network device via patch cable. It uses the grounding wire in addition to the phase and neutral line for the best possible data rates an range.|
|Mains filter||A special mains filter suppresses interfering signals.|
|Phase coupling||With automatic phase coupling, dLAN® is available in the entire building - also without pahse coupling.|
|Safety standards||128-bit AES encryption|
|Compatibility||Solar-Log 50, 250, 300, 1200, 1900 and 2000|
The WiFi Kit allows the Solar-Log™ to connect to the Internet via an existing WiFi infrastructure. Its flexible use makes an optimum placement possible, independent of the location of the Solar-Log™. The Kit provides speeds up to 750 MBit/s and communications with the new WLAN AC standard.
The universal WiFi range extender from NETGEAR® improves the coverage of every WiFi router or gateway. The direct connection to the wall power socket and additional socket allow for easy installation. The dynamic LED display helps locate the best position for optimal WiFi coverage.
|Communication standards||IEEE 802.11b/g/n,|
|IEEE 802.11 b/g/n|
|Frequency||2.4 GHz||2.4 GHz und 5 GHz|
|Security / encryption||WPA/WPA2-PSK,|
|Certifications||CE, FCC, RoHS||CE|
|Dimensions (w x h x d) in mm||110 x 65.8 x 75.22||114 x 55 x 22.5|
|Socket type||Europlug type c|
(CEE 7/16), EU, UK
|Schuko type E+F (CEE 7/7), EU|
|Device Ethernet connection||10/100Mbps Ethernet Port (RJ45)||10/100Mbps (RJ45)|
|Integrated power socket||no (-)||Schuko type E+F (CEE|
7/7), max. power 16 A
|Compatibility||Solar-Log 50, 250, 300, 1200, 1900 and 2000||Solar-Log 50, 250, 300, 1200, 1900 and 2000|
|Warranty||3 years||2 years|
The special PiggyBack (RS485) is an inexpensive alternative to the standard SMA PiggyBack (RS485). It can only be used with the Solar-Log™ and requires 4-pin wiring. The device is supplied with power from the Solar-Log™ unit and therefore needs to have the proper connecting cable with a sufficient wire diameter and length. It is suitable for use with all SMA inverters, unless a data module, Quick module or Speedwire* is being used.For more information, see the inverter’s manual. The interface card is to be installed by qualified personnel only. Solare Datensysteme GmbH is not liable for damage arising from connecting the PiggyBack to the inverter.
*In many countries, the designation ""Speedwire"" is a registered trademark of SMA Solar Technology AG.