Solar-Log™ Product Comparison

Interfaces

Product comparisonSolar-Log 300Solar-Log 1200Solar-Log 1900Solar-Log 2000
Ethernet network
USB
Potential-free contact (relay)-
Alarm contakt (anti-theft)--
InterfaceSolar-Log 300 Solar-Log 1200 Solar-Log 1900Solar-Log 2000
RS485/RS422 RS485/RS422 –
combined interface usage
RS485 - interface,
RS485/RS422–
combined interface usage
RS485 A - interface,
RS485/RS422 B,
RS485/RS422 C*-
combined interface
usage
RS485 A - interface,
RS485/RS422 B,
RS485/RS422 C*-
combined interface
usage
S485/422 –
interface usage






-Connection of a Sensor Box Professional Plus to record environmental data (irradiance, module and ambient temperature, wind sensor).
Sensor Box Professional
Meter connection, numerous options
Connection of the display panels produced by Schneider Displaytechnik, Rico oder HvG
Smart Relay Box connection for the management of consumption data
--Connecting the
Utility Meter and l/O Box
for PM remote control technology.
Connecting the
Utility Meter and l/O Box
for PM remote control technology.
CAN-bus --For the connection of Voltwerk inverters and other inverters with a CAN interface.For the connection of Voltwerk inverters and other inverters with a CAN interface.

*not with GPRS models

 

 

InterfacesSolar-Log 300Solar-Log 1200Solar-Log 1900Solar-Log 2000
2x S0-In / 1x S0-Out

S0 pulse input –
for optional recording and calculation of self-produced power consumption
S0 pulse input –
for optional recording and calculation of self-produced power consumption
S0 pulse input –
for optional recording and calculation of self-produced power consumption
S0 pulse input –
for optional recording and calculation of self-produced power consumption
Second input to connect an additional power meter.Second input to connect an additional power meter.Second input to connect an additional power meter.Second input to connect an additional power meter.
S0 pulse output to connect large external displays, pulse factor can be set to any value.S0 pulse output to connect large external displays, pulse factor can be set to any value.S0 pulse output to connect large external displays, pulse factor can be set to any value.S0 pulse output to connect large external displays, pulse factor can be set to any value.
Relay-For external switch control e.g. heat pumps.For external switch control e.g. heat pumps.For external switch control e.g. heat pumps.
Alarm--Connection for anti-theft protection via contact loop for external, alarms via potential-free contact.
USB ConnectionTo access data / Import firmware updates at plantsTo access data / Import firmware updates at plantsTo access data / Import firmware updates at plantsTo access data / Import firmware updates at plants
PM+

For connection of a Ripple Control Receiver to regulate the plant.For connection of a Ripple Control Receiver to regulate the plant.For connection of a Ripple Control Receiver to regulate the plant.For connection of a Ripple Control Receiver to regulate the plant.
Fulfills the EEG 2012 requirements (Germany).Fulfills the EEG 2012 requirements (Germany).Fulfills the EEG 2012 requirements (Germany).Fulfills the EEG 2012 requirements (Germany).
InterfacesSolar-Log 300Solar-Log 1200Solar-Log 1900Solar-Log 2000
Network Connection to the internet (Ethernet, fixed IP address or DHCP).