For the implementation of feed-in management

MOD I/O* - The new add-on module for the Solar-Log Base

The MOD I/O is the perfect addition to Solar-Log Base, enhancing its capabilities. With the numerous digital inputs and outputs of the MOD I/O, you are fully equipped to meet the requirements for implementing feed-in management. With plug and play, you just have to connect the MOD I/O to the Solar-Log Base.

MOD I/O Data sheet

*Please note

With the current version, only the PM+ function (connection to a ripple control receiver) is available. Addition functions (relays, alarms, etc.) will be available in the future with firmware updates for the Base module.

Advantages of the Solar-Log Base and MOD I/O Module

Transparent pricing

You only for the functions that you really need.


Simple installation with top hat rail mounting.


Simple implementation of new functions and adjustments.


Plug and play with the BUS connection on the Solar-Log Base.

Technical Data and Dimensions

Technical DataMOD I/O

Interface for ripple control receiver (PM+)</

Digital inputs /outputs

1 x PM (6 pin)

8x I/Os

VisualizationDisplay on the deviceStatus display directly on the device
InstallationPower supply optionalDepends on output current
Solar-Log Base communicationBus connector2 included in the delivery
Output voltage / device output12-24 Volt (+-10%) / typ. 2 W
Input voltageNominal value24 V
For signal „1“15 V to 24 V (at Vin 24 V)
For signal „0“0 V to 5 V (at Vin 24 V)
Input currentFor signal „1“Typically 2 mA
Total current of the outputsFor power with the HBus: 250mA
For external power supply: 1A
Output voltageFor signal „1“ Min. vin (-0,8 V)
Output currentFor signal „1“ Max. 150 mA
For signal „0“ (residual current)Max. 0,5 mA
Ambient temperature -20 °C to +50°C (without condensation)
Ambient temperature
-20°C to +60°C
Housing / dimensions (W x H x D)53.6 mm (3 DU) x 89.7 mm x 60.3 mm
MountingTop hat rails IEC/EN 60715 35mm
Cable lengthMax. 30m
Protection class according to EN60529IP 20
Warranty2 years
Power supplyVia BUS
CompatibilitySolar-Log Base
Article number256330

Search for

components supported by Solar-Log™

Important data and compatibility of the Solar-LogTM models at a glance. Here you can find the right Solar-LogTM for your component.

We are continually expanding our list of supported components. In the following link you can see the devices for which we can currently provide a beta firmware or an alpha driver.

Alpha Driver / Beta Firmware

SunSpec Alliance Logo

We are a member of the SUNSPEC Alliance

Do you need a list of all supported components by a specific manufacturer?
Simply enter the name of the manufacturer in the search field and click on the magnifier.