The MOD I/O is the perfect addition to Solar-Log Base, enhancing its capabilities. With the numerous digital inputs and outputs of the MOD I/O, you are fully equipped to meet the requirements for implementing feed-in management. With plug and play, you just have to connect the MOD I/O to the Solar-Log Base.
With the current version, only the PM+ function (connection to a ripple control receiver) is available. Addition functions (relays, alarms, etc.) will be available in the future with firmware updates for the Base module.
You only for the functions that you really need.
Simple installation with top hat rail mounting.
Simple implementation of new functions and adjustments.
Plug and play with the BUS connection on the Solar-Log Base.
|Technical Data||MOD I/O|
Interface for ripple control receiver (PM+)</
Digital inputs /outputs
1 x PM (6 pin)
|Visualization||Display on the device||Status display directly on the device|
|Installation||Power supply optional||Depends on output current|
|Solar-Log Base communication||Bus connector||2 included in the delivery|
|Output voltage / device output||12-24 Volt (+-10%) / typ. 2 W|
|Input voltage||Nominal value||24 V|
|For signal „1“||15 V to 24 V (at Vin 24 V)|
|For signal „0“||0 V to 5 V (at Vin 24 V)|
|Input current||For signal „1“||Typically 2 mA|
|Total current of the outputs||For power with the HBus: 250mA|
For external power supply: 1A
|Output voltage||For signal „1“||Min. vin (-0,8 V)|
|Output current||For signal „1“||Max. 150 mA|
|For signal „0“ (residual current)||Max. 0,5 mA|
|Ambient temperature||-20 °C to +50°C (without condensation)|
|-20°C to +60°C|
|Housing / dimensions (W x H x D)||53.6 mm (3 DU) x 89.7 mm x 60.3 mm|
|Mounting||Top hat rails IEC/EN 60715 35mm|
|Cable length||Max. 30m|
|Protection class according to EN60529||IP 20|
|Power supply||Via BUS|
Important data and compatibility of the Solar-LogTM models at a glance. Here you can find the right Solar-LogTM for your component.
We are continually expanding our list of supported components. In the following link you can see the devices for which we can currently provide a beta firmware.Beta_Firmware.pdf
We are a member of the SUNSPEC Alliance
Do you need a list of all supported components by a specific manufacturer?
Simply enter the name of the manufacturer in the search field and click on the magnifier.