Quick and easy data transfer

Communication

PowerLine Package
Wireless Kit Netgear
GPRS external antenna
Solar-Log™ RS485 Wireless Package
Wireless Kit TP-Link
Special PiggyBack

Alternative to network cables

PowerLine Package

The PowerLine Package is a problem-free alternative for transmitting data between the Solar-Log™ and the PC or the router without having to run extra cable when WiFi reception is poor or an Ethernet connection is problematic. Thanks to the integrated socket, a power connection is not wasted – the Solar-Log™, power strips or other devices can be connected directly to the adapter.  An integrated mains filter optimizes the transmission capacity even more. In public areas, a Kensington lock provides for efficient anti-theft protection.


Technical data
Transmission speed           up to 1200 Mbit/s
Integrated electrical socketType F (CEE 7/4) • F (CEE 7/4) • (DE, NL,
ES, PT, AT, SE, FI, NO, GR, HU)
Encryption128 Bit AES
Device connection1 x Ethernet RJ45
Power consumptionMaximum W/A: 4.2, typical W/A: 3.0, Stand-By W/A: 0.7
Output power for
integrated bus
16 A
Power supply internal 196-250 V AC 50 HZ
Temperature (storage, operating)-25° C to 70° C, 0° C to 40° C
Ambient conditions10 - 90% humidity (non-condensing)
RangePowerline 400 m
RegistrationsCE compliant: EU + (NO), CE Class B (EU, CH, NO)
Dimensions (w x h x d) in mm130 x 66 x 42 (without connector)
188.5 x 231 x 78.5 (single adapter)
188.5 x 231 x 78.5 (starter Kit)
Gigabit/Number of Ports/Auto-MDI-X1x Gigabit-LAN-Port with Auto-MDI-X Function for the connection of any network device via patch cable. It uses the grounding wire in addition to the phase and neutral line for the best possible data rates an range. 
Mains filterA special mains filter suppresses interfering signals.
Phase couplingWith automatic phase coupling, dLAN® is available in the entire building - also without pahse coupling.
Safety standards128-bit AES encryption
Warranty3 years
Article number256133

Improved data connection with GPRS

GPRS external antenna

The GPRS serves to improve the signal strength and is suitable for outdoor wall-mountings.


Technical data
FrequencyGSM 900:880 - 960 MHz / GSM 1800: 1710 - 1880 MHz
Impedance / Polarization50 Ohm / Vertical
Gain / power0 dB / max. 10 W
Dimensions (w x h x d) in mm, weight155 x 370 x 36 (Ø 16 mm), 420 g
Temperature range / type of protection-40 °C bis +80 °C, IP 66
Cabel length / connection4950 + 100 mm, FME Female or SMA
Warranty1 year

Wireless Internet

WiFi Kits

Wireless Kit TP-Link

The WiFi Kit allows the Solar-Log™ to connect to the Internet via an existing WiFi infrastructure. Its flexible use makes an optimum placement possible, independent of the location of the Solar-Log™. The Kit provides speeds up to 750 MBit/s and communications with the new WLAN AC standard.

Wireless Kit Netgear

The universal WiFi range extender from  NETGEAR® improves the coverage of every WiFi router or gateway. The direct connection to the wall power socket and additional socket allow for easy installation. The dynamic LED display helps locate the best position for optimal WiFi coverage.


technical dataTP-LinkNetgear
Communication standardsIEEE 802.11b/g/n,
IEEE 802.11ac
IEEE 802.11 b/g/n
Frequency2.4 GHz2.4 GHz und 5 GHz
AntennaInternalExternal
Security / encryptionWPA/WPA2-PSK,
64/128-bit WEP
WPA/WPA2-PSK, WEP
CertificationsCE, FCC, RoHSCE
Dimensions (w x h x d) in mm110 x 65.8 x 75.22114 x 55 x 22.5
Socket typeEuroplug type c
(CEE 7/16), EU, UK
Schuko type E+F (CEE 7/7), EU
Device Ethernet connection10/100Mbps Ethernet Port (RJ45)10/100Mbps (RJ45)
Integrated power socketno (-)Schuko type E+F (CEE
7/7), max. power 16 A
Warranty3 years2 years

Connecting inverters wirelessly

Solar-Log™ RS 485 Wireless Package

The Solar-Log™ RS485 Wireless Package makes it possible to connect to inverters even in places where cable connections are difficult. Radio modules are always deployed in pairs. When used in conjunction with the external and directional radio antenna, connections can be made at larger distances.  The test function helps you to find the optimal mounting location.  When placing an order, the name of the inverter manufacturer is required in order to pre-configure the Wireless Packages.


Technical data
Range inside buildingsUp to 80 m (up to three concrete walls)
Range over open field Up to 500 m, with directional radio antenna up to   800 m
Protection class, approvalIP 20, only suitable for internal use, CE standard
Power supply/ performance7 - 18 V, 1 watt
Frequency2.4 ghz
Temperature range 0 °C - 70 °C
Dimensions per piece (w x h x d) in mm, weight 70 x 140 x 30, 200g

AntennaDipole antenna, 2.1 dBi amplification
Warranty1 year

Communication between SMA inverter and Solar-Log™

Special PiggyBack (RS485)

The special PiggyBack (RS485) is an inexpensive alternative to the standard SMA PiggyBack (RS485). It can only be used with the Solar-Log™ and requires 4-pin wiring. The device is supplied with power from the Solar-Log™ unit and therefore needs to have the proper connecting cable with a sufficient wire diameter and length. It is suitable for use with all SMA inverters, unless a data module, Quick module or Speedwire* is being used.For more information, see the inverter’s manual. The interface card is to be installed by qualified personnel only. Solare Datensysteme GmbH is not liable for damage arising from connecting the PiggyBack to the inverter.

*In many countries, the designation ""Speedwire"" is a registered trademark of SMA Solar Technology AG.