The PowerLine Package is a problem-free alternative for transmitting data between the Solar-Log™ and the PC or the router without having to run extra cable when WiFi reception is poor or an Ethernet connection is problematic. An integrated power socket on the front panel prevents the power connection from being lost. The high bandwidth is achieved partially due to range+ Technology, which uses all three electric circuits for data transfers.
|Transmission speed||up to 1200 Mbit/s|
|Integrated electrical socket||Type F (CEE 7/4) • F (CEE 7/4) • (DE, NL,|
ES, PT, AT, SE, FI, NO, GR, HU)
|Encryption||128 Bit AES|
|Device connection||1 x Ethernet RJ45|
|Power consumption||Maximum W/A: 4.2, typical W/A: 3.0, Stand-By W/A: 0.7|
|Output power for |
|Power supply||internal 196-250 V AC 50 HZ|
|Temperature (storage, operating)||-25° C to 70° C, 0° C to 40° C|
|Ambient conditions||10 - 90% humidity (non-condensing)|
|Range||Powerline 400 m|
|Registrations||CE compliant: EU + (NO), CE Class B (EU, CH, NO)|
|Dimensions (w x h x d) in mm||130 x 66 x 42 (without connector)|
188.5 x 231 x 78.5 (single adapter)
188.5 x 231 x 78.5 (starter Kit)
|Gigabit/Number of Ports/Auto-MDI-X||1x Gigabit-LAN-Port with Auto-MDI-X Function for the connection of any network device via patch cable. It uses the grounding wire in addition to the phase and neutral line for the best possible data rates an range.|
|Mains filter||A special mains filter suppresses interfering signals.|
|Phase coupling||With automatic phase coupling, dLAN® is available in the entire building - also without pahse coupling.|
|Safety standards||128-bit AES encryption|
|Compatibility||Solar-Log Base, 50, 300, 1200, 1900 and 2000|
The WiFi Kit allows the Solar-Log™ to connect to the Internet via an existing WiFi infrastructure. Its flexible use makes an optimum placement possible, independent of the location of the Solar-Log™. The Kit provides speeds up to 750 MBit/s and communications with the new WLAN AC standard.
The universal WiFi range extender from NETGEAR® improves the coverage of every WiFi router. The NETGEAR® wireless kit is distinguished by its dynamic LED display that helps locate the best position for optimal WiFi coverage. Thanks to its integrated socket, the wall power socket can continue to be used as usual.
|Communication standards||IEEE 802.11b/g/n,|
|IEEE 802.11 b/g/n|
|Frequency||2.4 GHz||2.4 GHz und 5 GHz|
|Security / encryption||WPA/WPA2-PSK,|
|Certifications||CE, FCC, RoHS||CE|
|Dimensions (w x h x d) in mm||110 x 65.8 x 75.22||114 x 55 x 22.5|
|Socket type||Europlug type c|
(CEE 7/16), EU, UK
|Schuko type E+F (CEE 7/7), EU|
|Device Ethernet connection||10/100Mbps Ethernet Port (RJ45)||10/100Mbps (RJ45)|
|Integrated power socket||no (-)||Schuko type E+F (CEE|
7/7), max. power 16 A
|Compatibility||Solar-Log Base, 50, 300, 1200, 1900 and 2000||Solar-Log Base, 50, 300, 1200, 1900 and 2000|
|Warranty||3 years||2 years|
The Spezial-Piggy Back (RS485) is an inexpensive alternative to the standard SMA PiggyBack (RS485). It can only be used with the Solar-Log™ and requires 4-pin wiring. The device is supplied with power from the Solar-Log™ unit and therefore needs to have the proper connecting cable with a sufficient wire diameter and length. It is suitable for use with all SMA inverters, unless a data module, Quick module or Speedwire* is being used. Please refer to the inverter manufacturer’s manual for additional information. The interface card is to be installed by qualified personnel only. Important Notice: Solar-Log GmbH is not liable for damage arising from connecting the Spezial-Piggy Back (RS485) to the inverter.
*In many countries, the designation "Speedwire" is a registered trademark of SMA Solar Technology AG.