Quick and easy data transfer


PowerLine Package

Wireless Kit TP-Link

Wireless Kit Netgear

Special PiggyBack

Alternative to network cables

PowerLine Package

The PowerLine Package is a problem-free alternative for transmitting data between the Solar-Log™ and the PC or the router without having to run extra cable when WiFi reception is poor or an Ethernet connection is problematic. Thanks to the integrated socket, a power connection is not wasted – the Solar-Log™, power strips or other devices can be connected directly to the adapter.  An integrated mains filter optimizes the transmission capacity even more. In public areas, a Kensington lock provides for efficient anti-theft protection.

Technical data
Transmission speed           up to 1200 Mbit/s
Integrated electrical socketType F (CEE 7/4) • F (CEE 7/4) • (DE, NL,
Encryption128 Bit AES
Device connection1 x Ethernet RJ45
Power consumptionMaximum W/A: 4.2, typical W/A: 3.0, Stand-By W/A: 0.7
Output power for
integrated bus
16 A
Power supply internal 196-250 V AC 50 HZ
Temperature (storage, operating)-25° C to 70° C, 0° C to 40° C
Ambient conditions10 - 90% humidity (non-condensing)
RangePowerline 400 m
RegistrationsCE compliant: EU + (NO), CE Class B (EU, CH, NO)
Dimensions (w x h x d) in mm130 x 66 x 42 (without connector)
188.5 x 231 x 78.5 (single adapter)
188.5 x 231 x 78.5 (starter Kit)
Gigabit/Number of Ports/Auto-MDI-X1x Gigabit-LAN-Port with Auto-MDI-X Function for the connection of any network device via patch cable. It uses the grounding wire in addition to the phase and neutral line for the best possible data rates an range. 
Mains filterA special mains filter suppresses interfering signals.
Phase couplingWith automatic phase coupling, dLAN® is available in the entire building - also without pahse coupling.
Safety standards128-bit AES encryption
CompatibilitySolar-Log 50, 250, 300, 1200, 1900 and 2000
Warranty3 years
Article number256133

Wireless Internet

WiFi Kits

Wireless Kit TP-Link

The WiFi Kit allows the Solar-Log™ to connect to the Internet via an existing WiFi infrastructure. Its flexible use makes an optimum placement possible, independent of the location of the Solar-Log™. The Kit provides speeds up to 750 MBit/s and communications with the new WLAN AC standard.

Wireless Kit Netgear

The universal WiFi range extender from  NETGEAR® improves the coverage of every WiFi router or gateway. The direct connection to the wall power socket and additional socket allow for easy installation. The dynamic LED display helps locate the best position for optimal WiFi coverage.

Technical dataTP-LinkNetgear
Communication standardsIEEE 802.11b/g/n,
IEEE 802.11ac
IEEE 802.11 b/g/n
Frequency2.4 GHz2.4 GHz und 5 GHz
Security / encryptionWPA/WPA2-PSK,
64/128-bit WEP
CertificationsCE, FCC, RoHSCE
Dimensions (w x h x d) in mm110 x 65.8 x 75.22114 x 55 x 22.5
Socket typeEuroplug type c
(CEE 7/16), EU, UK
Schuko type E+F (CEE 7/7), EU
Device Ethernet connection10/100Mbps Ethernet Port (RJ45)10/100Mbps (RJ45)
Integrated power socketno (-)Schuko type E+F (CEE
7/7), max. power 16 A
CompatibilitySolar-Log 50, 250, 300, 1200, 1900 and 2000Solar-Log 50, 250, 300, 1200, 1900 and 2000
Warranty3 years2 years

Communication between SMA inverter and Solar-Log™

Special PiggyBack (RS485)

The special PiggyBack (RS485) is an inexpensive alternative to the standard SMA PiggyBack (RS485). It can only be used with the Solar-Log™ and requires 4-pin wiring. The device is supplied with power from the Solar-Log™ unit and therefore needs to have the proper connecting cable with a sufficient wire diameter and length. It is suitable for use with all SMA inverters, unless a data module, Quick module or Speedwire* is being used.For more information, see the inverter’s manual. The interface card is to be installed by qualified personnel only. Solare Datensysteme GmbH is not liable for damage arising from connecting the PiggyBack to the inverter.

*In many countries, the designation ""Speedwire"" is a registered trademark of SMA Solar Technology AG.