Practical and convenient protection against wind and severe weather

Installation Accessories


Overvoltage protection

Solar-Log™ Installation Housing for outdoor use

Greater security thanks to optimal protection

Overvoltage protection

The Solar-Log™ over-voltage conductor is a two-stage protective circuit with a gas-filled surge arrester as its coarse protection element. The precision protection consists of suppressor diodes. This conductor is used to protect data and signal lines.

This maintenance-free conductor is used to protect data and signal lines. This device protection has been specially developed for retrofitting the RS485/422 interface of the Solar-Log™. It is easy to install in just a few quick steps. Failures due to power surges are minimized.

Please note that it is not possible to have the overvoltage protection with the Solar-Log 2000 for the RS485-C interfaces. It is recommended to check the functionality of the conductor at least after every lighting season.




Technical dataSolar-Log 300Solar-Log 1200 and 2000
Nominal operating voltage5 V5 V
Maximum operating voltage6 V DC; 4.25 V AC6 V DC; 4.25 V AC
Maximum operating current500 mA500 mA
Protection level data line ground<= 25 V<= 25 V
Protection level data line GND<= 8,5 V<= 8,5 V
Fused interfaces1 (RS485/422)2 (RS485 A + RS485/422 B)
Dimensions (B x H x T) in mm52 x 88 x 1452 x 88 x 14
Warranty1 year1 year

Protection against dust and moisture

Solar-Log™ Installation Housing for outdoor use

The Solar-Log™ provides reliable protection to ensure safe operation under all weather conditions with protection against dust and moisture. The housing is available in two versions. The housing can be equipped with a data logger and additional components such as the RS485 Mobile Wireless Package. In addition to the Solar-Log™ socket, a second socket is included.



Technical dataVersion 1Version 2
Installation Housing

 

The Housing material is made of polycarbonate and ABS plastic. 


For quick and easy installation of the Solar-Log, the holes on the mounting wall have been pre-drilled.

There is space in the box for additional components.

The Housing material is made of polycarbonate and ABS plastic.


For quick and easy installation of the Solar-Log, the holes on the mounting wall have been pre-drilled.

There is space in the box for additional components.

Mounting

4 PG connections are available for the grid power network and other connections.

To mount the data logger properly, please removee the mounting plate from the installation and then mount the Solar-Log device. Them screw the mounting plate back on.

Hingers can be ordered to helf open the cover easily.

5 PG connections are available for the grid power network and other connections.

To mount the data logger properly, please removee the mounting plate from the installation and then mount the Solar-Log device. Them screw the mounting plate back on.

Hingers can be ordered to helf open the cover easily.

Stand colour for the enclosureGray / RAL 7035Gray / RAL 7035
SurfaceThe installation Housing is non-fading.The installation Housing is non-fading.
Steckdosen23
Protection classIP 65, when used wih the proper cable screws and when the cable conduits are properly sealed.IP 65, when used wih the proper cable screws and when the cable conduits are properly sealed.
Dimensions (w x h x d) in mm, Weight300 x 400 x 130, 3,53 kg300 x 600 x 130, 5,25 kg
Warranty2 years2 years