Specifically Control Appliances

Smart Energy Logics and Devices for Solar-Log™

With the help of Smart Energy Logics, various conditions can be defined for when an additional load is to be activated, for example at a certain surplus level. Different devices can be used to physically switch on the appliances. Depending on the specific purpose, the Solar-Log™ potential-free internal relay, a Smart Plug, the Smart Relay Box or the Smart Relay Station can be used. An appliance can be controlled via the internal relay of the Solar-Log Base. The relay can switch devices with a maximum voltage of 24 volts at a current up to 2 amps. The Smart Relay Box provides eight additional relays for the Solar-Log™ to use. Up to three appliances can be switched on and off with the Smart Relay Station; additionally, the Relay Station records the consumption via an internal meter.

The Solar-Log™ Smart Relay Box

  • Is equipped with potential-free contacts, e.g. for heat pumps (SG Ready).
  • Is connected to the Solar-Log™ via RS485.
  • Is well-suited in combination with load relays to control motors, pumps and ventilation and air-conditioning systems.
  • Free RS485 connection required.

The Solar-Log™ Smart Relay Station

  • Is equipped with 3 relays to directly switch loads up to 16A/230V.
  • Receives a response with the consumption values from each individual relay.
  • Is connected to the Solar-Log™ via Ethernet.