In principle all three Solar-Log™ models are able to monitor a PV plant completely and using modern technology via internet. The Solar-Log™ that is the best "match" depends on the plant size, availability of PC/internet and costs. The selection of accessories also helps decide which Solar-Log™ to select.
Log in with the account symbol (top right) to create a new plant under your account. Switch to "My Plants" and click on the plus symbol. Then a window appears to enter the "Plant Name" and "Serial Number." Enter the "Easy Code" if the Solar-Log™ should register automatically to the portal. Remove the top gray cover on the device to find the serial number and Easy Code. Then click on "Save." The plant is then automatically created. All the necessary information that needs to be entered in the Solar-Log™ to transfer data is located in the plant's "Access Data" section on the portal.
Device replacement in Solar-Log WEB-Enerest™If it is necessary to replace a Solar-Log™ device at your plant, you do not need to register the new device. The device replacement can be performed with you existing account.
The following steps are necessary to replace a device in the Solar-Log WEB-Enerest™ portal. Log in with the account symbol. Switch to "My Plants." Go to the plant where the device needs to be replaced and click on the tab "Solar-Log™ Replacement." Enter the serial number from the new Solar-Log™ in the serial number box (remove the top gray cover on the device to find the serial number) and then click on the "Replace" button. This completes the device replacement process and the Solar-Log™ now transfers its recorded data to the WEB portal.
To create a new password in Solar-Log WEB-Enerest™, log in with the account symbol, go to "Personal information" and click on the "Password" tab. You can generate a new password in the "password" box. After clicking on "Change Password" to save the password, the password will be activated and sent via e-mail to the registered e-mail address.
If you have forgotten your password, go to the account symbol (top right) and click on the link "Forgot your password?." Then the "Recover Password" window appears where you have to enter the e-mail address used for registration. A randomly generated password is send to this e-mail address. Please change this password right after you log in with it. (Refer to "Creating a new password in Solar-Log WEB-Enerest™).
If the Solar-Log WEB Enerest™ service for certain PV plants is not to be extended, there are two possibilities how this can be implemented. Use the link below to obtain a document explaining these options.
General procedure for connecting the Solar-Log 200 and/or 300 to a laptop or PC. The following link provides you with detailed instructions on how to enable DHCP on your PC in order to connect to the Solar-Log™ with a crossover network cable to be able to configure it.
When, for example, 105 kW or more is connected to a Solar-Log™ 1200, exceeding its limit of 100.99 kW. The following occurs: FTP Export is disabled (Remote Configuration still works). HTTP Export is disabled (Remote Configuration still works). The sending of error and yield notifications is disabled. The following message appears in the web interface: "The amount of connected generator power allowed for this device has been exceeded. The device's use is limited. Please check the device configuration."
Our Experts Provide Answers to Key Questions about the Solar-Log™ Communication.